Cecchi Kit C-System 10 10 CFS Epoxy Resin

One package contains:

• 1 kg of C-System 10 10 CFS comp. A
• 0.5 kg of C-System 10 10 CFS comp. B
• 1 Pair of mini pumps
• 3 recusable plastic cans
• 1 pack of 0.5L natural microfibers
• 1 0.5L package of thickener No. 2
• 1 package of 0.5L microfilmar power
• 1 package of 100g mineral microfibers
• 1 stick
• 6 disposable brushes
• 10 disposable gloves

Repairing, building, gluing, laminating, protecting, grouting, inventing and..

10 10 CFSIs a multifunctional, epoxy resin, ideal for repairing, building, gluing, laminating, protecting, grouting, and inventing on wood and fiberglass.
It contains no solvents (CFS Completely Free Solvent).

Subjected to mechanical testing at the laboratories of theCTS Experimental Technology Centerattended by RINA and other ship registers (RiNA Certificate Report No.2015/CS/01/3108).

It has an exceptional quality standard, and thanks to its fluidity, it takes advantage of a series of additives, making it usable in all kinds of processing to solve every need:

- Wood-to-wood, wood-to-glass, fiberglass-to-glass and heterogeneous materials adhesive;

- To laminate glass, carbon, kevlar fabrics on wood and on fiberglass etc. ... ;

- structural filler (Structural Filler), adding additives such as Microfiller Powder, Thickener No. 2 or Natural and Mineral Microfibers;

- filler and shaving filler;

- primer for painted wood in clear and unpainted;

- anti-osmosis fund;

- osmosis repair;

10 10 CFS has three catalysts-Standard, Slow, and Fast-that can also be mixed together to make an intermediate catalyst.
The Slow type is suitable in the Spring - Summer period and in any case with temperatures never below 15°C.

Mini pumps and pumps can be fitted (except in the 1.1 kg package), which unitarily distribute the correct amounts of resin and catalyst.

Epoxy system in 2:1 ratio by weight, 100% solid, very easy to apply, great reliability ideal for all general work both below and above the waterline.

MIXING
When mixing two-component products, you must always adhere to the correct mixing ratios, by weight or volume, as stated on the labels. Putting more or less catalyst, means wasting the mixture and compromising the work; adding solvent compromises the quality of the resin and the final result.
In 750 g packages (500 of A + 250 of B), 1.5 kg (1 of A + 0.5 of B), 4.5 kg (3 of A + 1.5 of B) and 30 kg (20 of A + 10 of B) mini-pumps and positive displacement pumps can be mounted that unitarily distribute the correct amounts of resin and catalyst.
Warning: in all types of packages to maintain the correct 2:1 mixing ratio by weight you have to do 1 pumping of A and 1 pumping of B, and so on. The pumps are already calibrated for the correct mixing ratio.

WHERE YOU MIX
Use the containers in our kit. They are made of high quality plastic and treated well, reusable for many times, almost indefinitely. Don't use cut bottles of mineral water, coffee cans, ice cream cups, other dubious containers, etc.-they will give you problems.

HOW TO APPLY
10 10 CFS resin is easily applied by brush or roller.
The roller turns out to be more suitable and faster for large surfaces.

APPLICATION
The 10 10 CFS resin once applied wets the surface.
After a couple of hours it becomes sticky (ready already to receive an additional coat or even additivated to form T-threads). It is possible, on the surface that is not perfectly dry, to make structural fillets or to apply Nautilus Epoxy Light Filler putty (contains no solvents), and even more efficient cohesion will be achieved.

PASTING
When 10 10 CFS is used for bonding, first apply a coat on both sides to impregnate the surfaces.
After about 10 minutes, add Thickener No. 2 or Natural Microfibers to the 10 10 CFS, apply to one side of the surface and put in place with gentle pressure so that the parts do not move.
All this is stipulated in DIN (Deutsches Institut für Normung) and ASTM (American Standard Test Method) standards.

THE UNCTUOUSNESS OF AMINES
When a night passes, between hand and hand it is essential, for the presence or doubt of the "dew point" and for the avoidance of misunderstanding, to sponge the surface with water to remove the greasiness, condensation (blush amine) that may form on the resin with changes in temperature or humidity. Better is a sponge like SCOTCH BRITE from the 3M from the rough side. If more than 48 hours pass, sand evenly with 100-grit paper, always after sponging the surface or, better, wet sand.

THE CONVENIENCE OF 10 10 CFS: 100% SOLID
Epoxy resin acts as a base in many paint products. When it is pure, without solvents such as 10 10 CFS, it has among its major characteristics of being an outstanding structural adhesive and of not leaching solvents into the air.

In the formulation of 10 10 CFS, other features were obtained such as ease of brushability, and the possibility of mixing it with additives to obtain products of various densities and characteristics to better meet processing requirements. In evaluating costs, the price of epoxy resin, in this case 10 10 CFS, must be divided, when used as a coating - primer or protective coat - by the number of square meters and thickness that is obtained.

For paints, the same measurement applies but we must pay attention between the wet film (freshly given, wet-film) and the dry film (dry-film). In the average paint product, the dry-film residue decreases and only 40 to 50 percent of the wet-film remains, meaning that the solvent part, the part that evaporates and pollutes (VOC), does not form thickness, protection and therefore does not defend the material we are protecting. To make a thickness equal to the 100 microns you get with one coat of 10 10 CFS, with enamels and paints, perhaps sanding between coats, you need 3 or 4 coats! This is in practical terms. Although it seems like you are spending more for 10 10 CFS when you make comparisons with thicknesses, in addition to the greater strength, there is also considerable cost-effectiveness.

10 10 CFS is RINA Certified (report #2015/CS/01/3108).

An average processing temperature of more than 15°C is required for the longer product life (mixture life i.e. POT-LIFE).

In the 750 g, 1.5 kg, 4.5 kg and 30 kg package, special mini pumps and pumps are available (to be purchased separately) for perfect volume dosing.

Attention- The mini pumps that came with the 750 g and 1.5 kg 10 10 CFS packages have been changed. Thenew mini pumpsare blue for component A and red for component B. The pumping cycle is also changed and becomes, for proper mixing ratio, 1 pumping of A and 1 pumping of B.

Therefore, pay attention to the type of pumps you are using. The old pumps were completely white with a green (A) and red (B) sticker and required 2 pumps of A and 1 pump of B.

In the 4.5 kg and 30 kg packages, the volumetric pumps have also changed: blue color with red ring for component A and red color for component B. The mixing ratio remains the same and is 1 pumping of A plus 1 pumping of B.

Even in the kg. 30 (20 of A + 10 of B) and kg. 4.5 (3 of A + 1.5 of B) packages, you can assemble thepositive displacement pumps, (which unitarily distribute the correct amounts of resin and catalyst to make mixing and processing faster and safer).

Spot checks are carried out by us on the packaged pumps, as it is impossible to check them individually.
It is thereforeINDISPENSABLEby the user to verify, with an electronic scale, the amount of resin and catalyst dispensed by each pump in order to comply with the 2:1 catalyzing proportion by weight. This is to further verify their perfect operation for proper drying of the preparation.