Manual return selvedge spinner SEA SURE

Made of stainless steel, equipped with a nylon pulley. The "Sea Sure" furler is designed to guarantee complete reliability. The drum is closed and protected to prevent the line from getting stuck or twisted during the opening and closing operations. It is made of stainless steel bearings to ensure perfect operation even when the pulley is subjected to maximum tension. Its height of only 50 mm allows the jib to be installed very low, just above the deck for maximum sail efficiency. It can also be mounted below deck using an additional stainless steel extension tube. The jib furler can furl up to 3.5 mm of 3 mm diameter line, thus allowing the use of sails with a lower edge length (between tack and sheet point) of about 3 m. This length is reduced for sails with a lower edge length of 3 mm. This length is reduced for lines with a larger diameter.