Tanks, pipes and hydraulic fittings

Tanks, pipes and hydraulic fittings | HiNelson
Filter by
Price
€ €
Manufacturers
more... less
Warehouse
Filter
Inspection cap with grip for easy opening
Drains, scuppers and valves
Osculati

Inspection cap with socket for easy opening

€6.29
Watertight screw closure as they are equipped with rubber O-rings. New type of grip for easy opening (slightly protruding).
Aleggio
Drains, scuppers and valves
Osculati

Aleggio

€8.19
Made of chrome-plated brass, with nylon cap. Equipped with a handy device that does not allow the cap to come off even when unscrewed.
Sump drain 45° with non-return valve
Drains, scuppers and valves
Osculati

Drain from well 45° with non-return

€109.50
Made of 316 stainless steel; with non-return system thanks to an internal ball that blocks any backflow. Removable grid for cleaning.
Drain for sump drainage
Drains, scuppers and valves
Osculati

Drain for sump drainage

€35.90
Made of mirror-polished AISI 316 stainless steel. Snap-fit top grid, with additional function of hiding the fixing screws.
Cam expansion cap
Drains, scuppers and valves
Osculati

Expansion plug through cams

€2.99
For draining water from sumps, fish boxes, bait boxes. Pressure adjustable by rotation. Brass cams, stainless steel washers, neoprene body.
Full passage gate valve with blocking
Drains, scuppers and valves
Osculati

Full pass gate valve with blocking

€59.90
Made of chrome-plated brass. Stainless steel handle with perforated stop for inserting a padlock. Ideal for complying with the ISO 8099 standard for black water discharge.
Dutral anti-salt rubber grommet
Drains, scuppers and valves
Osculati

Dutral anti-salt rubber cable grommet

€4.99
By means of a special built-in flange, it is pressure-mounted on the sump bulkhead, without ferrules or screws. Terminal prepared to be cut.
Cam expansion float caps.
Drains, scuppers and valves
Osculati

Floating cam expansion plugs.

€8.59
For draining water from sumps, fish boxes and bait boxes. Rotationally adjustable pressure. Neoprene body and nylon housing. 3-piece kit.
In-line filter for bilge and shower pumps
Drains, scuppers and valves
Osculati

In-line filter for bilge and shower pumps

€10.45
Avoids clogging caused by detritio hair. Transparent plastic casing for easy inspection. Especially suitable for connecting rod pumps type Par, Fiamma, FLOJET, Shurflo etc.
Universal pipe adapter Universal pipe adapter 2
Drains, scuppers and valves
Osculati

Universal pipe adapter

€15.95
Made of plastic, it allows pipe connections of 1"1/2 - 1" - 3/4". 20/25/38 mm hose holder. Can be modified after cutting using the SLEEVE adapter to connect 2 1"1/2" fittings.
Remote controlled PN40 ball valve
Drains, scuppers and valves
Osculati

Remote electro-controlled PN40 ball valve

€294.50
Manufactured from nickel-plated brass, full passage with reversible electric servomotor. Turning time 14 seconds. Manual emergency control conforming to ISO228. Complete with remote ON-OFF control panel and safety fuse, controls up to 10 valves simultaneously.
Quick release couplings for water systems KP Ø 12 mm
Drains, scuppers and valves
Osculati

Quick couplings for water systems KP Ø 12 mm

€18.45
Instant snap-on assembly. A simple squeeze of the hose and a safety clip on the fitting is all that is needed for engagement. Fully reusable fittings made of high-strength food-safe plastic with semi-rigid polyethylene tubing.
Expansion water cap
Drains, scuppers and valves
Osculati

Expansion water cap

€4.59
Made of stainless steel with neoprene grommet. Adaptable to all bushings. Locking by rotation of the sleeper. Preferable to models with eccentric (18.539.00/535.00 and 18.533.00), when operating in confined spaces or where less rapid but more secure locking is desired. Ø 22 mm.
BHF inlets (Buzzi Hi Flow)
Drains, scuppers and valves
Osculati

BHF (Buzzi Hi Flow) Sea Intakes

€149.50
The special profile of this sea inlet allows, for the same cross section, 2.5 times more water volume to enter than a traditional sea inlet. In addition, the one-piece stainless steel casting can withstand the pressure of any lifting band without damage. Complete with ground connection.
Ecological device to be inserted along the fuel vent pipe with double function
Drains, scuppers and valves
Osculati

Environmentally friendly device to be inserted along the fuel vent pipe with dual function

€15.95
Its functions are: 1) it only lets air through and blocks the fuel when it arrives, so it eliminates fuel streaks on the side of the boat; 2) when the fuel is in the vicinity of this device, it emits a characteristic hissing sound that signals "tank full."
Hydrofix system of fittings for water systems, suitable for maximum temperature 70°.
Drains, scuppers and valves
Osculati

Hydrofix system of water system fittings, suitable for maximum temperature 70°

€5.69
Instant Snap-on Mounting. A simple push of the hose onto the fitting is all that is needed for assembly. The fitting is reusable, just replace the retaining ring. The fittings are polyamide and the tubing is polyethylene. RINA approved fittings with MAC/119897/1TO/98 certificate.
WHALE three-way fitting with automatic sensor IC
Drains, scuppers and valves
Whale

WHALE three-way fitting with automatic sensor IC

€104.50
WHALE three-way fitting with automatic sensor IC
WHALE waste outlet with automatic sensor IC
Drains, scuppers and valves
Whale

WHALE drain outlet with IC automatic sensor

€84.90
WHALE drain outlet with IC automatic sensor
Barrel 1" 1/2 x 200 mm
Fittings

Barrel 1" 1/2 x 200 mm

BA0762
€29.90
Barrel 1" 1/2 x 200 mm
Spare part for black water filter - Vetus
Last items in stock
Maintenance and cleaning of water tanks
Vetus

Black water filter replacement - Vetus

DA0952
€36.92
Replacement for filter Vetus.
Hose connector in white nylon
Fittings

White nylon hose holder

€1.89
Hose holder in white nylon for rigid water tanks.
90° male hose connector in polypropylene
Fittings

90° polypropylene male hose connector

€1.89
90° polypropylene male hose connector
Nylon T-fitting for water pipes
Fittings

Nylon tee fitting for water piping

€0.89
Nylon tee fitting for water piping
Headphones Manta model in bronze - Guidi Headphones Manta model in bronze - Guidi 2
Fittings
Guidi

Manta model headphone in bronze - Guidi

€18.10
Combined with the sea discharge sea outlet is created.
Product added to wishlist
Product added to compare.